跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 7

步骤 7
Repeat this procedure with the adjacent battery cell: Apply a small amount of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive. Alternatively, re-heat this section with your iOpener if needed.
  • Repeat this procedure with the adjacent battery cell:

  • Apply a small amount of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive.

  • Alternatively, re-heat this section with your iOpener if needed.

  • Push a plastic card about an inch between the battery cell and the upper case, and slowly pry the cell up to separate all of the adhesive.

在相邻的电池单元中重复操作。

将少量的液体粘合剂去除剂置于电池单元下方,并等待2-3分钟以使其渗透并软化粘合剂。

或者,如果需要,可以使用iOpener重新加热此部分。

将电池单元和上盖之间的塑料卡推进去一英寸,然后缓慢地将电池撬开以分离所有粘合剂。

在开源创作共享许可协议下,你的投稿已被许可