跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的46本指南

英语
中文

正翻译步骤 2

步骤 2
Use the flat end of a spudger to lift the battery connector straight up out of its socket on the logic board. Be sure you lift up only on the connector itself, not the socket, or you risk permanent damage to the logic board.
  • Use the flat end of a spudger to lift the battery connector straight up out of its socket on the logic board.

  • Be sure you lift up only on the connector itself, not the socket, or you risk permanent damage to the logic board.

用撬棒的平端,将电池连接器从主板插座上直着往上撬起。

确保您只抬起了连接器本身,而不是插座,否则您可能会对主板造成永久性的损坏。

在开源创作共享许可协议下,你的投稿已被许可