跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的14指南

英语
法语

正翻译步骤 1

步骤 1
Before proceeding, power off the device, close the lid and lay it on a soft surface top-side down.
  • Before proceeding, power off the device, close the lid and lay it on a soft surface top-side down.

  • Remove the following ten screws:

  • Two 9 mm 5-point Pentalobe screws

  • Eight 2.6 mm 5-point Pentalobe screws

  • The special screwdriver needed to remove the eight 5-point Pentalobe screws can be found here.

Avant de commencer, fermez votre ordinateur et posez-le à l'envers sur une surface douce.

Dévissez les dix vis suivantes :

Deux vis Pentalobe 5 points de 8 mm

Huit vis Pentalobe 5 points de 2,5 mm

Vous trouverez le tournevis spécial dont vous aurez besoin pour dévisser les huit vis Pentalobe 5 points ici.

-[* icon_note] Before proceeding, close your computer and lay it on a soft surface top-side down.
+[* icon_note] Before proceeding, power off the device, close the lid and lay it on a soft surface top-side down.
[* black] Remove the following ten screws:
[* red] Two 9 mm 5-point Pentalobe screws
[* orange] Eight 2.6 mm 5-point Pentalobe screws
[* icon_note] The special screwdriver needed to remove the eight 5-point Pentalobe screws can be found [product|IF145-090|here].

在开源创作共享许可协议下,你的投稿已被许可