跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Lay the glass panel face-up and rotate it so that the lens holes are on your right. Grasp the adhesive from both sides and align the tape over the rear glass. Make sure to align the camera and heart rate sensor holes on the phone with the adhesive tape.
  • Lay the glass panel face-up and rotate it so that the lens holes are on your right.

  • Grasp the adhesive from both sides and align the tape over the rear glass.

  • Make sure to align the camera and heart rate sensor holes on the phone with the adhesive tape.

  • Lay the adhesive on top of the glass.

将玻璃面板内侧朝上放置,并将其旋转至镜头孔朝向你的右手边。

抓住粘合胶两侧并将其对准后部玻璃。

请确定将粘合胶对准了手机上的摄像头及心率传感器开孔。

将粘合胶平铺在玻璃上。

在开源创作共享许可协议下,你的投稿已被许可