跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 6

步骤 6
The solder bead should look like a small dome or hemisphere. If it is flat or jagged, simply place the soldering iron back on the solder to re-melt it and then pull the soldering iron away. It may require a little more solder if this does not work.
  • The solder bead should look like a small dome or hemisphere. If it is flat or jagged, simply place the soldering iron back on the solder to re-melt it and then pull the soldering iron away. It may require a little more solder if this does not work.

焊珠应该呈一个丘形或半球形。如果它是扁平的或呈锯齿状,需将烙铁放回焊点上重新熔化焊锡,然后将烙铁向正上方拉开。如果这不起作用,可能需要重复步骤五。

在开源创作共享许可协议下,你的投稿已被许可