跳转到主内容
英语
中文

正翻译步骤 6

步骤 6
Test the check valve. Blowing air in it from the boiler side should cause it to open. Repeat that a couple of times to loosen any sediments etc. It will also help to run some hot water from the K-cup side into the check valve and shake it up. Once it is cleaned, replace the check valve and the tie straps. Reassemble the Keurig
  • Test the check valve. Blowing air in it from the boiler side should cause it to open. Repeat that a couple of times to loosen any sediments etc. It will also help to run some hot water from the K-cup side into the check valve and shake it up. Once it is cleaned, replace the check valve and the tie straps. Reassemble the Keurig

测试一下止回阀。 从加热壶侧吹气使其打开。 重复几次来松动任何沉淀物等。这也有助于将热水从K-cup侧运入止回阀并摇动清理。 一旦清洁完成,更换止回阀和扎带。 重新组装Keurig

在开源创作共享许可协议下,你的投稿已被许可