跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的427本指南

英语
中文

正翻译步骤 4

步骤 4
If you don't have a microwave, follow this step to heat your iOpener in boiling water. Fill a pot or pan with enough water to fully submerge an iOpener.
Alternate heating method
  • If you don't have a microwave, follow this step to heat your iOpener in boiling water.

  • Fill a pot or pan with enough water to fully submerge an iOpener.

  • Heat the water to a boil. Turn off the heat.

  • Place an iOpener into the hot water for 2-3 minutes. Make sure the iOpener is fully submerged in the water.

  • Use tongs to extract the heated iOpener from the hot water.

  • Thoroughly dry the iOpener with a towel.

  • The iOpener will be very hot, so be careful to hold it only by the end tabs.

  • Your iOpener is ready for use! If you need to reheat the iOpener, heat the water to a boil, turn off the heat, and place the iOpener in the water for 2-3 minutes.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

+[title] Alternate heating method
+[* icon_note] If you don't have a microwave, follow this step to heat your iOpener in boiling water.
+[* black] Fill a pot or pan with enough water to fully submerge an iOpener.
+[* black] Heat the water to a boil. ***Turn off the heat.***
+[* black] Place an iOpener into the hot water for 2-3 minutes. Make sure the iOpener is fully submerged in the water.
+[* black] Use tongs to extract the heated iOpener from the hot water.
+[* black] Thoroughly dry the iOpener with a towel.
+ [* icon_caution] The iOpener will be very hot, so be careful to hold it only by the end tabs.
+[* black] Your iOpener is ready for use! If you need to reheat the iOpener, heat the water to a boil, turn off the heat, and place the iOpener in the water for 2-3 minutes.

在开源创作共享许可协议下,你的投稿已被许可