跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 11

步骤 11
Before installing a new display, it's very important to remove all traces of the old adhesive from the frame, while taking special care to remove any small glass fragments.
  • Before installing a new display, it's very important to remove all traces of the old adhesive from the frame, while taking special care to remove any small glass fragments.

  • After removing all traces of glue and glass from the frame, clean the adhesion areas with 90% (or higher) isopropyl alcohol and a lint-free cloth or coffee filter. Swipe in one direction only, not back and forth.

  • If the frame is bent, or if any glue or glass remnants are left behind, the new display will not mount correctly and may be damaged. If necessary, replace the frame.

  • The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.

在安装新的显示器之前,从框架上移除所有痕迹的旧粘合剂非常重要,同时要特别注意移除任何小的玻璃碎片。

从框架上除去所有痕量的胶水和玻璃后,用90%(或更高)异丙醇和无绒布或咖啡过滤器清洁粘合区域。只于一个方向上滑动,不要来回移动。

如果框架弯曲,或者任何胶水或玻璃残留物留在后盖上,新的显示器将不能正确安装并可能损坏。如果有必要,更换框架。

确保新屏幕的最好方法是用一片定制的双面胶带。将胶带应用到屏幕背面,然后小心地通过框架给显示电缆供电。对齐屏幕并将其按压到位。

在开源创作共享许可协议下,你的投稿已被许可