跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 5

步骤 5
Insert an opening pick about 0.5 inches (~12mm) under the bottom corner of the display, near the headphone jack. Keep a close eye on the button's ribbon cable as you insert the pick. The cable is fragile and very easy to tear. If the pick is hard to insert or the cable starts to stretch, apply more heat.
  • Insert an opening pick about 0.5 inches (~12mm) under the bottom corner of the display, near the headphone jack.

  • Keep a close eye on the button's ribbon cable as you insert the pick. The cable is fragile and very easy to tear. If the pick is hard to insert or the cable starts to stretch, apply more heat.

  • Leave the pick under the display to prevent the button from re-adhering to the display.

  • If you do break either of the capacitive buttons or ribbon cables, you can replace the daughterboard assembly, which includes new capacitive buttons.

插入一个约0.5英寸(约12mm)的开口,在显示器的底部角落(靠近耳机插孔)。

密切注意按钮的带状电缆插入插入。电缆易碎,很容易撕破。如果撬片很难插入,或者电缆开始拉伸,则必须继续加热。

将显示屏放在显示器下方,以防止主屏幕按钮再次粘附到显示器上。

如果您损坏了电容性按钮或带状电缆中的任何一个组件,那么您可以替换子板组件,该子板组件包括新的电容性按钮。

在开源创作共享许可协议下,你的投稿已被许可