跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的3本指南

英语
中文

正翻译步骤 3

步骤 3
Slide the pick down the edge of the display to separate the adhesive underneath. Stop cutting when you get to the daughterboard to avoid the delicate capacitive button under the display.
  • Slide the pick down the edge of the display to separate the adhesive underneath.

  • Stop cutting when you get to the daughterboard to avoid the delicate capacitive button under the display.

  • If cutting becomes difficult at any point, reheat and reapply the iOpener.

  • After cutting the adhesive, leave the pick in the side of the display to prevent the display from re-adhering to the frame.

将手机翻过来使其正面朝下。

在显示屏的边缘滑动拾取器以分离下面的粘合剂。

当你走到副板时,停止切割,以避免显示器下方的精细电容按钮。

在切割粘合剂之后,将粘胶留在显示器的侧面,以防止显示器重新粘附到框架上。

在开源创作共享许可协议下,你的投稿已被许可