注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 2

步骤 2
Remove the battery from the phone. Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.
  • Remove the battery from the phone.

  • Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.

  • To install a new battery:

  • Remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.

  • Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone, not directly onto the battery. The adhesive should go around the perimeter of the battery compartment, but not in the rectangular cutout in the center (which is actually the back side of the display).

  • Press the battery firmly into place for 5-10 seconds.

把电池从手机中取出

不要重复使用拆下来的旧电池,因为这是一个安全隐患。请用一块新电池来替代它。

安装新电池:

从手机中去掉任何残留的粘合剂,并使用异丙醇和无绒布擦拭粘合区域。

用预切割粘合剂或双面胶带固定新电池。为了正确地定位,将新的粘合剂安放在电话中,而不是粘到电池上。粘合剂应该围绕电池隔层的旁边,而不是在中心的矩形切口(实际上是显示屏的背面)。

将电池牢牢地按住5-10秒。

在开源创作共享许可协议下,你的投稿已被许可