注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 1

步骤 1
Insert a plastic opening pick between the case and the battery. Be careful to keep the pick as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. Push the pick further in to separate the battery from the phone.
  • Insert a plastic opening pick between the case and the battery.

  • Be careful to keep the pick as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Push the pick further in to separate the battery from the phone.

  • If the battery is too strongly adhered for the opening pick, place a warm iOpener over the battery to loosen the adhesive.

  • Alternatively, apply some isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive.

  • Do not pry against the motherboard or you may damage the phone.

在外壳和电池之间插入塑料撬片。

尽可能小心,并保持塑料撬片平整插入,以避免弯折电池,否则可能会损坏电池并使其释放危险的化学物质。

将塑料撬片进一步推入以将电池与手机分开。

如果电池被太牢固地粘住,无法将塑料片插入,请将加热的iOpener放在电池上来松开粘合剂。

另外,在电池的每一个角落都涂上一些异丙醇,让它们作用几分钟,以溶解粘合剂。

不要撬动主板,否则可能会损坏手机。

在开源创作共享许可协议下,你的投稿已被许可