跳转到主内容

加热iOpener

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的444本指南

英语
中文

正翻译步骤 2

步骤 2
iOpener Heating: 步骤 0 中的图像 1,1
  • Heat the iOpener for thirty seconds.

  • Depending on the wattage of your microwave, more or less time may be required. The iOpener is sufficiently heated when it's barely too hot to touch.

  • Throughout the repair procedure, as the iOpener cools, reheat it in the microwave for an additional thirty seconds at a time.

  • Be careful not to overheat the iOpener during the repair. Overheating may cause the iOpener to burst. Do not attempt to heat over 100˚C (212˚F).

  • Never touch the iOpener if it appears swollen.

  • If the iOpener is still too hot in the middle to touch, continue using it while waiting for it to cool down some more before reheating. A properly heated iOpener should stay warm for up to 10 minutes.

加热iOpener三十秒

在整个维修过程中,如果iOpener 冷却了,在微波炉中每次重新加热额外的三十秒。

注意在维修过程中不要过度加热iOpener,过热可能会导致iOpener爆炸。不要试图加热超过100摄氏度。

如果iOpener过热膨胀,千万不要触碰iOpener。

如果iOpener中间部分依然烫的没法碰,请等待冷却后再使用,加热好的iOpener 应该可以保持热度十分钟

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利