跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南

英语
中文

正翻译步骤 2

步骤 2
Be sure to slide the metal spudger between the dock connector and the antenna cover, and not into the dock connector itself.
  • Be sure to slide the metal spudger between the dock connector and the antenna cover, and not into the dock connector itself.

  • Insert a metal spudger into the slot between the dock connector and the antenna cover. Gently pry up near the two tabs to create a small gap between the antenna cover and the silver front bezel.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可