跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的12本指南

英语
中文

正翻译步骤 1

步骤 1
Before proceeding, unplug and power down your MacBook. Close the display and flip it upside-down.
  • Before proceeding, unplug and power down your MacBook. Close the display and flip it upside-down.

  • 2015 models only: To avoid logic board damage, when your MacBook repair is complete but before powering it on, connect it to low-voltage power using a 5-Watt iPhone charger and a USB-C to USB-A cable.

  • Remove the following eight screws securing the lower case:

  • Two 1.8 mm P5 Pentalobe screws

  • Four 2.9 mm P5 Pentalobe screws

  • Two 6.1 mm P5 Pentalobe screws

  • Note the orientation of the screws as you remove them—they need to be reinstalled at a slight angle.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your device.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可