翻译步骤＃2 - iPhone 1st Generation Antenna Cover Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南。

英语

中文

正翻译步骤 2

步骤 2

Be sure to slide the metal spudger between the dock connector and the antenna cover, and not into the dock connector itself.
Insert a metal spudger into the slot between the dock connector and the antenna cover. Gently pry up near the two tabs to create a small gap between the antenna cover and the silver front bezel.

在开源创作共享许可协议下，你的投稿已被许可。