跳转到主内容

修复你的物品

维修的权力

商店

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 2

步骤 2
This is a good time to power on your iPad and test all functions before you seal the display in place. Be sure to power your iPad back down completely before you continue. If you're installing a new front panel assembly, it may need the following preparation:
Front panel preparation
  • This is a good time to power on your iPad and test all functions before you seal the display in place. Be sure to power your iPad back down completely before you continue.

  • If you're installing a new front panel assembly, it may need the following preparation:

  • Peel the large clear plastic liner off of the inside of the glass.

  • Peel any blue plastic backings covering the adhesive around the perimeter of the front panel assembly.

  • Once removed, the adhesive strips will be exposed. Don't remove these backings until you're ready to install the front panel assembly.

  • Don't remove any copper coverings from the outlined region, such as yellow kapton tape or black electrical tape.

  • Ensure the glass panel is free of fingerprints and grime before installing it on your device.

如果您要安装新的面板组件,那您需要做些准备。

剥离围绕前面板组件周边的粘合剂的塑料条。

从数字转换器电缆上取下小块粘合剂。

确保所有的铜焊覆盖在新的更换屏幕上,一旦 错误安装,屏幕将随意移动。

[*title] Front panel preparation
[* icon_reminder] This is a good time to power on your iPad and test all functions before you seal the display in place. Be sure to power your iPad back down completely before you continue.
[*
icon_note] If you're installing a new front panel assembly, it may'''may''' need the following preparation:
[* red] Peel the large clear plastic stripsliner off of the inside of the glass.
[* orange] Peel any blue plastic backings
covering the adhesive around the perimeter of the front panel assembly.
[* orange] Remove

[* icon_caution] Once removed,
the small piece of adhesive backingstrips will be exposed. Don't remove these backings until you're ready to install the front panel assembly.
[* yellow] '''Don't remove any copper coverings
from the digitizer cableoutlined region''', such as yellow kapton tape or black electrical tape.
[* black] Make sure all copperEnsure the glass panel is coveredfree of fingerprints and grime before installing it on the new replacement screen as once fitted without this the screen will move randomlyyour device.
[*title] Front panel preparation
[* icon_reminder] This is a good time to power on your iPad and test all functions before you seal the display in place. Be sure to power your iPad back down completely before you continue.
[*
icon_note] If you're installing a new front panel assembly, it may'''may''' need the following preparation:
[* red] Peel the large clear plastic stripsliner off of the inside of the glass.
[* orange] Peel any blue plastic backings
covering the adhesive around the perimeter of the front panel assembly.
[* orange] Remove

[* icon_caution] Once removed,
the small piece of adhesive backingstrips will be exposed. Don't remove these backings until you're ready to install the front panel assembly.
[* yellow] '''Don't remove any copper coverings
from the digitizer cableoutlined region''', such as yellow kapton tape or black electrical tape.
[* black] Make sure all copperEnsure the glass panel is coveredfree of fingerprints and grime before installing it on the new replacement screen as once fitted without this the screen will move randomlyyour device.

在开源创作共享许可协议下,你的投稿已被许可