翻译步骤＃5 - iPod Nano 1st Generation Battery & Logic Board Replacement - iFixit

修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南。

英语

中文

上一步下一步

正翻译步骤 5

步骤 5

Grasp the end of the logic board near the battery connector with one hand, and hold onto the rest of the iPod with your other hand.

Grasp the end of the logic board near the battery connector with one hand, and hold onto the rest of the iPod with your other hand.
Make sure the logic board is lifted slightly above the white plastic notch on the battery side of the board. This notch prevents the board from sliding out in the next step.
Slide the logic board out of its holding brackets on the rear of the display.
The logic board is still connected to the iPod by two ribbon cables.

在开源创作共享许可协议下，你的投稿已被许可。