跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
View without cover. Here is the water pump.
  • View without cover.

  • Here is the water pump.

  • Water tank

  • Inlet, remove the two screws as it is attached to the pump

  • Remove these screws to free the pump. once free *carefully* cut the cable ties on the two hoses so it can be removed

  • Once all the lines are free you will need to un-solder the two wires attached to the pump so that it can be fully removed.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可