跳转到主内容
英语
中文

正翻译步骤 12

步骤 12
Pull the circuit boards loose from the bottom plate. You may need to use a spudger to pry the circuit free. The mouse cable is glued to the bottom plate, so do not quickly yank the circuit boards away.
  • Pull the circuit boards loose from the bottom plate.

  • You may need to use a spudger to pry the circuit free.

  • The mouse cable is glued to the bottom plate, so do not quickly yank the circuit boards away.

  • The circuit boards are not very strongly attached to each other; do not pull hard on the top board or they may separate, damaging the device.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可