修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 2

步骤 2
It will be necessary to slide the small clear plastic cable retainer (boxed in red) glued to the logic board out of the way before disconnecting the camera cable. Be careful not to break any components off the board as you slide it away from the camera cable connector.

  • It will be necessary to slide the small clear plastic cable retainer (boxed in red) glued to the logic board out of the way before disconnecting the camera cable. Be careful not to break any components off the board as you slide it away from the camera cable connector.

  • Pull the camera cable connector toward the optical drive to disconnect it from the logic board.

  • This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces.

在断开相机电缆之前，必须将粘贴到逻辑板上的小透明塑料电缆固定器（红色框）滑出。 当您将其从相机电缆连接器上滑开时，请小心不要将板上的任何组件断开。

将相机电缆连接器朝向光驱驱动器拉动，以将其与逻辑板断开连接。

这个插座是金属的，容易弯曲。 在重新连接两者之前，请确保将连接器与逻辑板上的插座对齐。

在开源创作共享许可协议下，你的投稿已被许可。