注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南。
正翻译步骤 12
步骤 12

-
Remove the following Tri-point screws securing the battery to the upper case:
-
One 5.5 mm Tri-point screw
-
One 13.5 mm Tri-point screw
-
Lift the battery out of the upper case.
[* icon_note] Removing the battery before lifting out the logic board is not strictly required, but makes removing the logic board easier and safer. If you leave your battery in, be especially careful not to bend the logic board against the battery's case near its bar code. |
[* black] Remove the following [* red] One 5.5 mm [* orange] One 13.5 mm |
[* black] Remove the following [* red] One 5.5 mm [* orange] One 13.5 mm |
[* black] Lift the battery out of the upper case. |