跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the two T6 Torx screws from each side of the hard drive (four screws total). You'll need to transfer these screws to your new hard drive if you're changing drives.
  • Remove the two T6 Torx screws from each side of the hard drive (four screws total).

  • You'll need to transfer these screws to your new hard drive if you're changing drives.

  • If you are installing a new hard drive, we have an OS X install guide to get you up and running.

从硬盘的每一侧(总共四个螺丝)拆下两个T6梅花螺丝。

如果您正在更换硬盘,则需要将这些螺丝装到新的硬盘上。

如果您正在安装新的硬盘,我们有一个OS X安装指南,让您开始运行。

在开源创作共享许可协议下,你的投稿已被许可