翻译步骤＃3 - iPod Nano 1st Generation Rear Panel Replacement - iFixit

Fix Your Stuff

Right to Repair

Parts & Tools

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南。

英语

中文

上一步下一步

正翻译步骤 3

步骤 3

Opening the iPod can be challenging. Don't get discouraged if it takes you a few tries before the iPod is opened.

Insert the large iPod opening tool into the seam between the front case and rear panel of the iPod, below the dock connector. Run the tool back and forth to create an opening. The tool's edge should point toward the rear panel to prevent any accidental scratching of the aluminum front case.

Opening the iPod can be challenging. Don't get discouraged if it takes you a few tries before the iPod is opened.
Insert the large iPod opening tool into the seam between the front case and rear panel of the iPod, below the dock connector. Run the tool back and forth to create an opening. The tool's edge should point toward the rear panel to prevent any accidental scratching of the aluminum front case.

在开源创作共享许可协议下，你的投稿已被许可。