跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Using a fingernail or spudger, flip up the retaining flap on the following three ZIF connectors. Action button contact pad ribbon UMD drive ribbon
  • Using a fingernail or spudger, flip up the retaining flap on the following three ZIF connectors.

  • Action button contact pad ribbon

  • UMD drive ribbon

  • Be sure you are prying up on the retaining flap, not the socket itself.

  • Use your fingernail or tip of a spudger to push both sides of the black retaining flap on the UMD laser ribbon socket to the right.

  • Use your fingers or a spudger to gently pull all three ribbon cables straight out of their sockets.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可