跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 4

步骤 4
Use your fingernail or the edge of a spudger to flip up the retaining flap on the UMD drive ribbon socket. Be sure you are prying up on the retaining flap, not the socket itself Use your fingernail or tip of a spudger to push both sides of the black retaining flap on the UMD laser ribbon socket to the right.
  • Use your fingernail or the edge of a spudger to flip up the retaining flap on the UMD drive ribbon socket.

  • Be sure you are prying up on the retaining flap, not the socket itself

  • Use your fingernail or tip of a spudger to push both sides of the black retaining flap on the UMD laser ribbon socket to the right.

  • Use a spudger to gently pull both ribbon cables straight out of their sockets.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可