跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的18本指南

英语
中文

正翻译步骤 1

步骤 1
The screw circled in orange may not be present in some models.
  • The screw circled in orange may not be present in some models.

  • Remove the following 16 screws:

  • Thirteen 3 mm Phillips.

  • One 3 mm Phillips. (actual screw not present in image)

  • Two 4 mm Phillips.

  • Be sure to fit the screw near the left hinge through the loop in the display data cable, securing the cable to the upper case.

  • Missing in this photo is the Bluetooth antenna present in some iBooks. It is located at the upper right corner of the battery compartment, just above the 4mm screw. You can see the bracket for the antenna in the photo. It is the two I-shaped holes just above the 4mm screw that must be removed in this step. To remove the antenna, slide it toward the LCD, and tilt it vertically back towards yourself.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可