跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 3

步骤 3
Insert the flat end of a spudger under the middle of the inverter board. Slide the spudger to the far left and right edges to separate the inverter board from the adhesive securing it to the front bezel.
  • Insert the flat end of a spudger under the middle of the inverter board.

  • Slide the spudger to the far left and right edges to separate the inverter board from the adhesive securing it to the front bezel.

  • Remove the inverter board.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可