修复你的物品

维修的权力

商店

返回指南
英语
中文
上一步 下一步

正翻译步骤 3

步骤 3
Tighten the handle on the crank puller until the arm and gears slide off of the axle. The crank puller works by locking into the threads on the arm and pushing against the Isis drive axle to pry the arm and gears off. Make sure you are using the correct size crank puller, otherwise this step will not work. During reassembly, add some grease to the axle to make it easier to remove the arm in the future.

  • Tighten the handle on the crank puller until the arm and gears slide off of the axle.

  • The crank puller works by locking into the threads on the arm and pushing against the Isis drive axle to pry the arm and gears off. Make sure you are using the correct size crank puller, otherwise this step will not work.

  • During reassembly, add some grease to the axle to make it easier to remove the arm in the future.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下，你的投稿已被许可。