跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 3

步骤 3
The surrounding speaker component (the black box) around the power inlet needs to be removed. Use the TR 10 screwdriver to remove the four screws. Disconnect the speaker from behind the logic board by carefully pulling at the plastic end of the cable.
  • The surrounding speaker component (the black box) around the power inlet needs to be removed.

  • Use the TR 10 screwdriver to remove the four screws.

  • Disconnect the speaker from behind the logic board by carefully pulling at the plastic end of the cable.

  • Remove the speaker.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可