跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
You should now see the EMI filter right in the middle of the device (although held in by a few other components). Follow the wires coming out of the bottom of the Power adapter off to the left.
  • You should now see the EMI filter right in the middle of the device (although held in by a few other components).

  • Follow the wires coming out of the bottom of the Power adapter off to the left.

  • Take the tweezers and remove the piece of tape holding the wires to the casing.

  • There is only one connector that needs to be taken out (even though there are two right next to each other!).

  • Grab the connector from the bottom and pull it carefully from its corresponding socket.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可