跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
The fan is connected to the main logic board by two connectors. Make sure that while disconnecting them, grab the wire at the point closest to the board and the  pull slowly to avoid damaging the connectors. Remove the piece of tape that is holding the wires to the casing. Remove the piece of tape that is holding the wires to the casing.
  • The fan is connected to the main logic board by two connectors. Make sure that while disconnecting them, grab the wire at the point closest to the board and the pull slowly to avoid damaging the connectors.

  • Remove the piece of tape that is holding the wires to the casing.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可