跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 2

步骤 2
Arrange the chain in the chain breaker so the connector aligns with the press. Slowly tighten the screw until the connector begins to slide out of the link. DO NOT push the connector all the way out.
  • Arrange the chain in the chain breaker so the connector aligns with the press.

  • Slowly tighten the screw until the connector begins to slide out of the link. DO NOT push the connector all the way out.

  • DO NOT push the connector all the way out, only enough to separate the links. This is essential in reconstructing your chain without purchasing a master link.

  • Now that you have your old chain off, you can either clean it or replace it. If you replace the chain make sure you buy the correct length and size!

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可