跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 5

步骤 5
For the next connector, which is right next to the previous wire, there is a piece of tape attached to a metal bar. Flip the metal bar over using the tape as a handle. Next, grab onto the connector and slowly pull it from the socket in the logic board.
  • For the next connector, which is right next to the previous wire, there is a piece of tape attached to a metal bar.

  • Flip the metal bar over using the tape as a handle.

  • Next, grab onto the connector and slowly pull it from the socket in the logic board.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可