跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 8

步骤 8
The following steps detail repairing a Force Touch sensor with separated layers. If you're replacing your Force Touch sensor with a new part, ignore these steps. The remaining adhesive sticker backing makes a great work surface. Open the gap between the two layers, but do not peel apart any more of the original adhesive.
  • The following steps detail repairing a Force Touch sensor with separated layers. If you're replacing your Force Touch sensor with a new part, ignore these steps.

  • The remaining adhesive sticker backing makes a great work surface.

  • Open the gap between the two layers, but do not peel apart any more of the original adhesive.

  • Apply super-glue to the lower half of the sensor and press the upper half down into the glue. Press hard to squeeze out any excess glue and make the sensor as thin as possible.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可