跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
Remove the single tri-point screw securing the Force Touch sensor connector cable. Tri-point Y000 Screwdriver Bit
  • Remove the single tri-point screw securing the Force Touch sensor connector cable.

  • Tri-point Y000 Screwdriver Bit

  • This screw is very small and strips easily. Keep your driver at the correct angle and push to apply pressure to the screw as you turn.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可