跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 8

步骤 8
If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive. Rotate the battery down into its slot, and press it into position. Press the battery down against the S1 to re-adhere it in place.
  • If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive.

  • Rotate the battery down into its slot, and press it into position.

  • Press the battery down against the S1 to re-adhere it in place.

  • Now is the best time to test powering on your watch—if it doesn't turn on, double check all three connectors and try again.

如果你的备用电池带有预装的粘合剂,请立即撕下保护拉条,露出粘合剂。

将电池向下旋转到其插槽中,然后将其按入到位。

向下按电池使其紧贴S1。

现在就是手表开机的最佳时机,如果不能开机。那请再次检查那三个排线、

在开源创作共享许可协议下,你的投稿已被许可