跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 4

步骤 4
Once you've opened the gap enough, insert the tip of an opening pick under the glass. Slide the pick along the bottom edge to separate adhesive holding the screen to the case. Be careful not to insert the opening pick too far. Only about 1/8" ( about 3 mm) is necessary, any deeper and you may damage cables.
  • Once you've opened the gap enough, insert the tip of an opening pick under the glass.

  • Slide the pick along the bottom edge to separate adhesive holding the screen to the case.

  • Be careful not to insert the opening pick too far. Only about 1/8" ( about 3 mm) is necessary, any deeper and you may damage cables.

一旦你打开一个足够大的间隙,在玻璃下面插入一个开口器。

沿底部边缘滑动的选择分离胶粘剂持有屏幕的情况。

小心不要把开口挑得太远。约1 / 8“(约3毫米)就足够了,如果弄得更深,你可能会损坏电缆。

在开源创作共享许可协议下,你的投稿已被许可