注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 1

步骤 1
Place the heated iOpener on the face of the watch.
  • Place the heated iOpener on the face of the watch.

  • Leave the iOpener on the watch for at least a minute to heat the screen and soften the adhesive holding it to the case.

  • You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.

将加热过的 iOpener 放在表的正面。

至少1分钟后从上面拿开,使得屏幕变热以软化粘合剂。

你或许需要多次从复以上步骤,当然,也可以将 iOpener 在手表正面冷却的部分慢慢摩擦旋转,以便有足够温度去取下屏幕。

在开源创作共享许可协议下,你的投稿已被许可