菜单

你的设置

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 10

步骤 10
There are two cables connecting the screen to the inside of the watch, near the top left corner. Be careful when prying or you may damage these cables. Pry slightly up on the right side of the screen, to free it from any remaining adhesive. Pry up on the left to free it as well—but do not attempt to remove the screen as it is still held in place by two cables.

  • There are two cables connecting the screen to the inside of the watch, near the top left corner. Be careful when prying or you may damage these cables.

  • Pry slightly up on the right side of the screen, to free it from any remaining adhesive.

  • Pry up on the left to free it as well—but do not attempt to remove the screen as it is still held in place by two cables.

有两条导线从手表的内部延伸出来连接在屏幕上，在左上角附近。千万要小心操作，有可能你会把线撤掉的。

拿着屏幕，把屏幕的右侧慢慢的轻轻的抬起来，直到所有的胶都脱开。

同样的，左侧也要慢慢的处理。但是不要尝试取下屏幕，背后的线还连着呢。

在开源创作共享许可协议下，你的投稿已被许可。