Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 4

Step 4
Using a curved blade minimizes the chance of scratching the case or cracking the glass. Only pry with the curved section of the blade, and not the tip or flat section. Place the curved section of the blade in the gap between the glass and case on the lower edge of the watch face, and press firmly straight down into the gap. Be very careful to maintain complete control over the knife—once the gap opens, if you're pressing too hard on the knife it may slip in and cut the battery.
Pry up the screen
  • Using a curved blade minimizes the chance of scratching the case or cracking the glass. Only pry with the curved section of the blade, and not the tip or flat section.

  • Place the curved section of the blade in the gap between the glass and case on the lower edge of the watch face, and press firmly straight down into the gap.

  • Be very careful to maintain complete control over the knife—once the gap opens, if you're pressing too hard on the knife it may slip in and cut the battery.

  • This should wedge the gap open and cause the glass to lift slightly up from the case.

  • When the glass has lifted, gently rotate the knife down, opening the gap more by pushing the glass up.

使用一个弯曲的刀片控制不好角度有可能导致划伤玻璃。要用弯曲的部分撬她,而不是平的部分

将刀片弯曲的部分放在玻璃和机身之间较低边缘的缝隙,然后小心并且竖直地插入缝隙里

继续的时候一定要非常小心,确保完全控制好你的刀——太大力的话可能不但会划伤玻璃,而且会切到电池

这里应该用刀轻轻翘起屏幕,得到一个漂亮的缝隙(像图片那个样子就对了)

撬起了一个较大的缝隙后,旋转你的刀(如图),并继续苦逼地慢慢撬吧

在开源创作共享许可协议下,你的投稿已被许可