菜单

你的设置

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南。

返回指南
英语
中文
上一步 下一步

正翻译步骤 3

步骤 3
Because the gap between the screen and watch body is so thin, a sharp blade is required to separate the two. Read the following warnings carefully before proceeding. Protect your fingers by keeping them completely clear of the knife. If in doubt, protect your free hand with a heavy glove, such as a leather shop glove or gardening glove.
Observe all warnings

  • Because the gap between the screen and watch body is so thin, a sharp blade is required to separate the two. Read the following warnings carefully before proceeding.

  • Protect your fingers by keeping them completely clear of the knife. If in doubt, protect your free hand with a heavy glove, such as a leather shop glove or gardening glove.

  • Be careful not to apply too much pressure, as this might cause the knife to slip and cut you, or damage the watch.

  • Wear eye protection. The knife or glass may break, sending pieces flying.

警告！警告！警告！

因为屏幕和机身之间的缝隙太小，一把锋利的小刀（打广告的话就是sharp blade）是需要的。在拆开之前好好盯着下面老司机的开车技巧！

始终保护好你的手指 （大概也不会有人放在刀刃上吧）如果需要的话，你可以戴上一副厚厚的手套（皮手套还是园艺手套什么的只要你开心都是可以的）

小心点，不要施加太大的压力，否则可能会翻车，伤害到自己或者她都是不好的。安全第一位哦！

戴上护目镜。小刀或玻璃可能会碎裂，碎片会向你直飞过来。。。

在开源创作共享许可协议下，你的投稿已被许可。