跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
With the help of a syringe or anything that can suck liquid, clean the remaining ink from the tube. I also went ahead and cleared the pad from as much ink as I could, it can buy you a bit more life span to the pad if you are in a hurry to print and not have the replacement items for this hack. I did not have a syringe at the time and used a desolder pump, takes way longer though.
  • With the help of a syringe or anything that can suck liquid, clean the remaining ink from the tube.

  • I also went ahead and cleared the pad from as much ink as I could, it can buy you a bit more life span to the pad if you are in a hurry to print and not have the replacement items for this hack.

  • I did not have a syringe at the time and used a desolder pump, takes way longer though.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可