跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
First free all ribbon cables from their connections on the motherboard. The two areas circled in red are where the ribbon cables connections need to be freed from the logic board.
Start by disconnection ribbon cables.
  • First free all ribbon cables from their connections on the motherboard.

  • The two areas circled in red are where the ribbon cables connections need to be freed from the logic board.

  • Free the ribbon cables from the logic board with a plastic pry tool.

  • Now that the ribbon cable connections are free you will now need to remove a metal clip around the usb port.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可