跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的27本指南

英语
中文

正翻译步骤 3

步骤 3
The following connector has an especially deep socket. Use care when disconnecting it. While gently pulling the I/O board cable upward near its connection to the logic board, use the flat end of a spudger to pry up on alternating sides of the connector to help "walk" it out of its socket.
  • The following connector has an especially deep socket. Use care when disconnecting it.

  • While gently pulling the I/O board cable upward near its connection to the logic board, use the flat end of a spudger to pry up on alternating sides of the connector to help "walk" it out of its socket.

  • Remove the I/O board cable.

以下排线座具有特别深的插座。请小心的把他断开

轻轻地将 I/O 板延长线向上挑起,则使用撬棒的平端撬动排线的侧面,以帮助将其从插座中拿出来。

拆下 I/O 板电缆。

在开源创作共享许可协议下,你的投稿已被许可