Skip to main content
英语
中文

正翻译步骤 1

Step 1
Place the camera facing forward so that the LCD screen side is facing up. Remove the four 3.2 mm Phillips screws with a #00 Phillips screwdriver.
  • Place the camera facing forward so that the LCD screen side is facing up.

  • Remove the four 3.2 mm Phillips screws with a #00 Phillips screwdriver.

  • Note: The screws are located around the edges connecting the lens to the casing.

  • Do not remove the top right Phillips screw because the lens gears may fall out.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可