Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 9

Step 9
Leave the camera facing backward so that the lens is facing up.
  • Leave the camera facing backward so that the lens is facing up.

  • Pull the motherboard out by lifting it up on the left side about a 1/2 inch from the case and then slide it to the left.

  • Note: When reassembling, make sure the ZIF connectors are not covered by motherboard.

  • Caution: When removing the motherboard, pay special attention to the battery door detection switch or you may break the plastic nib.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可