跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 5

步骤 5
Place the camera backward so that the lens is facing up.
  • Place the camera backward so that the lens is facing up.

  • Disconnect the ribbon at the bottom of the main board by flipping up the brown ZIF connector and sliding the ribbon out.

  • Note: Tweezers are recommended to perform this step.

  • Remove the right most square connector at the bottom of the camera by flipping up the connector with two fingers until it detaches.

  • Locate and remove the white rubber cover on the microphone.

  • Note: Be sure not to lose the white rubber cover for the microphone.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可