Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
中文

正翻译步骤 5

Step 5
Place the camera on the side opposite of the wrist strap handle.
  • Place the camera on the side opposite of the wrist strap handle.

  • Then begin to pry the casing apart with both hands by applying pressure to the top and bottom of the camera.

  • Remove the small metal plate underneath the plastic covering and set aside. (It should be loosely attached)

  • Note: A rubber foam washer that separates the lens from the casing will fall off when the case is removed. Be sure to store it safely.

  • Note: When reassembling ensure the back plate screw tabs are over the wrist strap attachment and the front plate screw tabs go under orange casing.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可