Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

Step 1
Remove the four 1.8 mm PH0 screws that are holding the board in. When you remove these screws, the plastic cups inside the PS Move stations will fall out.
  • Remove the four 1.8 mm PH0 screws that are holding the board in.

  • When you remove these screws, the plastic cups inside the PS Move stations will fall out.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可